Monel 400 Material Properties
Monel 400 Material Properties. Mechanical properties elastic (young's, tensile) modulus 160 gpa 24 x 106 psi elongation at break 20 % fatigue strength 280 mpa 40 x 103 psi poisson's ratio 0.32 shear. Monel 400®, or k400 (.
Available in bar, wire, sheet, foil, plate, fittings,. Mechanical properties elastic (young's, tensile) modulus 160 gpa 24 x 106 psi elongation at break 20 % fatigue strength 280 mpa 40 x 103 psi poisson's ratio 0.32 shear. The graph bars on the material properties cards below compare hot worked monel 400 to:
Annealed Gauges:>.003 Inches Ultimate Tensile Strength:
As typical of most nickel alloy components, monel forged fittings can be produced using. Mechanical properties of monel 400 at room temperature properties: Mechanical properties elastic (young's, tensile) modulus 160 gpa 24 x 106 psi elongation at break 20 % fatigue strength 280 mpa 40 x 103 psi poisson's ratio 0.32 shear.
This Alloy Is Available In Some Standard Shapes Such As Hexagon, Round, Tube, Pipe, Plate, Strip, Sheet And Wire.
Alloy 400 or simply put as monel 400 is a high performance nickel based alloy. As illustrated above, the yield strength and tensile strength were measured at several elevated temperatures: Monel 400 has a minimum tensile strength of 70 ksi or 485 n/mm2 and yield strength in the range of 25.
Monel Alloy 400 (Na13, 2.4360) Is Supplied.
It has high strength and toughness over a wide temperature range and excellent resistance to. Monel alloy’s good corrosion resistance and high strength properties also make it a great option in marine engineering, piping, cabling, chemical processing, as well as a variety of other. Monel 400® has low corrosion rate in flowing seawater, therefore it is widely used in marine applications.
At The Same Time, It Is More Corrosion.
Monel 400 chemical and mechanical properties the density of monel is 8.8 g/cm3. Monel alloy 400 offers better resistance to corrosion by chlorinated solvents even at the boiling temperatures and is utilized for dry cleaning device and solvent distillation and reclamation. It is useful at temperatures up to 1000°f (538°c).
It Was Provided With Permission By Special Metals At Www.specialmetals.com.
Monel 400 is a corrosion resistant nicu easily machined, and fabricated. As a solution strengthened material, monel alloy 400 displays good strength, toughness and corrosion resistance at temperatures up to 400°c. Available in bar, wire, sheet, foil, plate, fittings,.
Post a Comment for "Monel 400 Material Properties"